WT1ABC5
 |
Adhesive base and cover, 5 ft. length (1.52m). WallTrak 1 is a single channel non-metallic raceway with a patented hinged cover that provides the wiring distribution, storage and interface to your power, voice, and data needs. This locking hinge holds wiring in place during installation. It also prevents the wires from being pinched when the raceway is closed. The neutral office white color of the WallTrak raceway will blend in with virtually any decor. It can be mounted horizontally or vertically, and is complemented by a full line of boxes and fittings. It is available with or without adhesive backing. The base and cover snap tightly together, and can only be opened at the raceway ends, thereby making the system tamper resistant. Locking Hinge: WallTrak 1 is equivalent to ˝ inch conduit. When open, WallTrak creates a V-shaped trough to hold wiring in place until raceway is closed. This design allows users to add, remove and access cables easily. Low Profile: When closed, WallTrak protrudes only about .50 inches (12.7) from the wall. Two Lengths:WallTrak is available in either 5 foot or 7 foot lengths, making it easier to layout horizontal or vertical runs. |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Component | Raceway |
| Raceway Style | 1 Channel |
| Channel Size (WxD) | WallTrak 1- 1.23" x 0.50" (31.2 x 12.7) |
| Length | 5' |
| Adhesive | Yes |
| Materials | U.V. Stabilized PVC |
| Adhesive Style | Modified Acrylic Base |
| Listings/Approvals | UL Listed 300 lbs. (1334 N) crush resistance and 5 ft./lbs. (6.8 J) impact resistance, CSA Certified. |
| Flammability | UL 94V0 |
| National Electric Code | Article 352 B |
| Voltage | UL 600 Volt Rated |
| Dimension A | 1.23" W (31.2) |
| Dimension B | .50 D (12.7) |
| Dimension C | 5 ft (1.52m) |
| Color |  |
| Capacities | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||
| Specifications |
|---|
| The nonmetallic surface raceway system specified herein for branch
circuit wiring or data, voice, signal wiring shall be Hubbell WallTrak manufactured by
Hubbell Wiring Device-Kellems® or approved equal. Work shall include furnishing all raceway, and appropriate fittings and boxes to install a nonmetallic surface raceway system as indicated on the electrical drawings and described in this section. Installer shall comply fully with the manufacturer's instructions, and with electrical and safety codes. The raceway shall be a two-piece design with a base and a snap-on cover. The cover shall be assembled to the base with a locking hinge which creates a V-shaped trough to hold wires in place during installation and to provide access to conductors. Raceway shall have a .06" (1.52) wall and be provided in 5 ft. (1.52m) or 7 ft. (2.13m) lengths. It shall be approximately 1.23" (31.2) wide and .50" (12.7) deep for series WallTrak (WT1). Both base and cover are to be manufactured of rigid PVC compound. The base shall have a smooth texture, office white in color; the cover, a light pebble texture, office white in color. Raceway base and cover shall be designated as WallTrak 1 WT1BC5 (5 feet length) or WT1ABC5 (with adhesive)), or WT1BC7 (7 feet length) or WT1ABC7 (with adhesive). A full complement of nonmetallic fittings must be available, including but not limited to 90° elbows, tees, conduit adapters, splice covers, end caps, and transition adapters. They shall be made of office white rigid PVC material to match color of raceway. Hubbell "WT1" series (WallTrak 1). Device boxes shall include one-gang low profile 1.13" deep (28.7), one-gang standard 1.63" deep (41.4), one-gang deep 1.91" (48.5), two-gang deep 1.91" deep (48.5), and a 5.31" (134.9) round light fixture box 1.05" deep (26.7). Each box shall have the capability of accepting WallTrak 1 raceway profile. Hubbell "WT12" series. Face plates shall be nonmetallic Hubbell "KP" series to match color of raceway and fit flush to device boxes. The raceway and all system components must be UL Listed and CSA Certified and exhibit nonflammable self-extinguishing characteristics tested to comparable specifications of UL 94V0. |
| Features/Benefits | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
